frank
New Member
Posts: 14
|
Post by frank on Oct 2, 2009 12:52:43 GMT -5
starting this thread to keep all info together tires and rims the fit ft and rear,,,,,,
|
|
|
|
Post by coony278 on Oct 2, 2009 17:40:38 GMT -5
what info are you wanting ?
|
|
|
|
Post by 82stang on Oct 3, 2009 8:14:12 GMT -5
going to order rims this weekend what size rim did u use on those 26x10x15's i'm using 411 gears and was going to get 15x10 rims with 5.5 back space for those size slicks
|
|
|
|
Post by coony278 on Oct 3, 2009 23:30:29 GMT -5
If you get 10" wheels you need a 6.5" back spacing. A 8" wheel needs a 5.5" inch back spacing . that is what is on my car 8" with 5.5 " back spacing.
|
|
|
|
Post by bowtiestang on Oct 4, 2009 1:29:44 GMT -5
I am running MT ET drags 28-10.5x15 on 15x10 with 6.5 bs. I need to run a 1/4 spacer and did lots of hammer work on the inner wells...and roll the outer lips  |
|
frank
New Member
Posts: 14
|
Post by frank on Oct 4, 2009 16:49:35 GMT -5
thanks coony278 and bowtie you are a big help!!!!
|
|
|
|
Post by coony278 on Oct 4, 2009 18:19:35 GMT -5
x2 on the big hammer !!! You really have to get after the innner fender well.
|
|
|
|
Post by bowtiestang on Oct 6, 2009 20:06:57 GMT -5
Here is a old pic with some 295-50-15 these are the same size as a 26-10.5x15 ET Street and fit with no hammer work  |
|
