cw
New Member
Posts: 15
|
Post by cw on May 15, 2007 23:38:16 GMT -5
What motor mounts were used?
|
|
|
|
Post by jap901 on Jun 17, 2007 18:30:27 GMT -5
I know of a couple of people that put a 350 in a 94-98 mustang. I will find out what they use or had to do.
|
|
|
|
Post by jap901 on Jun 17, 2007 19:48:11 GMT -5
What motor mounts were used? Jegs high performance sells tubular k members for the 79-93 fox fitted with sbc mounts. They are made by AJE racing. Jegs part # is 040-mu-3030. Retail is 429.00. So with this the engine would be bolted up with ease. |
|
cw
New Member
Posts: 15
|
Post by cw on Jun 18, 2007 1:20:27 GMT -5
I did check on the k members but im on a budget and live in Canada so im trying to find a little more cost effective way to do it.
|
|
|
|
Post by sbcstang on Jun 18, 2007 8:28:24 GMT -5
What motor mounts were used? Jegs high performance sells tubular k members for the 79-93 fox fitted with sbc mounts. They are made by AJE racing. Jegs part # is 040-mu-3030. Retail is 429.00. So with this the engine would be bolted up with ease. And don't forget the $39.99 spring perches. Unless you go coil over. |
|
|
|
Post by jap901 on Jul 2, 2007 15:28:14 GMT -5
I emailed www.latemodelrestoration.com about a 96 mustang k member for the a small block chevy and here is there reply below. for those of you in Interested. www.ajeracing.com/mustang.php wesite says MU-4030 MS 4.6 and Engine Swap Mounts $349 Jim, I just heard back from AJE & they do have the k-member! We have it in our system now under part # AJE-MU4030 for $349.95. Give one of our sales guys a call & they will get you set up. Thanks, Jonathan McDonald Research & Development Latemodel Restoration Supply 254-296-6587 - phone 254-296-6566 - fax www.latemodelrestoration.com |
|
|
|
Post by coony278 on Jan 3, 2009 23:40:27 GMT -5
Heck a piece of flat 1/4 " steel welded to the existing ford K member works pretty good and then just put a chevrolet clam shell mount on top of the plate steel. Save alot of money.....
|
|
|
|
Post by 57L chevy stang on Jan 5, 2009 20:56:50 GMT -5
mine are welded but the passenger side broke soon after
|
|
|
|
Post by coony278 on Jan 5, 2009 21:42:22 GMT -5
I'am sure the welder had something to do with that .........
|
|
|
|
Post by blender on Jul 25, 2009 17:00:58 GMT -5
I know of a couple of people that put a 350 in a 94-98 mustang. I will find out what they use or had to do. Ever find any of those pics for the mounts |
|
|
|
Post by blender on Sept 13, 2009 18:07:39 GMT -5
did you ever figure out what to do about the motor mounts
|
|
