|
|
Post by jaywill on Mar 5, 2010 23:08:48 GMT -5
|
|
38398
New Member
Posts: 2 
|
Post by 38398 on Mar 6, 2010 9:13:51 GMT -5
that was quick
hey man how did you post those pictures its not working for me
|
|
|
|
Post by jaywill on Mar 6, 2010 13:16:50 GMT -5
that was quick hey man how did you post those pictures its not working for me you have to upload your pics to a host like "photobucket" then copy the links for "form,e-mail ,ect " then right click and paste where ever |
|
|
|
Post by jaywill on Mar 7, 2010 6:08:47 GMT -5
NOS SET-UP  |
|
|
|
Post by mike on Mar 13, 2010 16:31:53 GMT -5
yo! Nice! Did u get the headers yet?
|
|
|
|
Post by jaywill on Mar 15, 2010 2:45:46 GMT -5
no not yet ..i heard that the hedmen headersfor a 69 camaro will work the r just 1.3/4  my that was on the motor was 2" so i might have to get the high $ ones..... |
|
|
|
Post by coony278 on Apr 19, 2010 22:50:19 GMT -5
man that ought to be a rocket !
|
|
|
|
Post by jaywill on Apr 21, 2010 20:32:11 GMT -5
man that ought to be a rocket ! i hope so if i ever finish it.. ;D   |
|
|
|
Post by coony278 on Apr 22, 2010 20:20:26 GMT -5
It looks like there is lots of room for headers in there.
|
|
|
|
Post by jaywill on Apr 23, 2010 12:26:55 GMT -5
It looks like there is lots of room for headers in there. tryin to find out what chevy header will about work to keep from buying the $600.00 ones  |
|
|
|
Post by coony278 on Apr 27, 2010 21:23:00 GMT -5
just order you a header hit and start welding , it aint that hard with some patients
|
|
|
|
Post by coony278 on Jul 4, 2010 23:22:27 GMT -5
any updates on how the car is coming ?
|
|
|
|
Post by jaywill on Jul 7, 2010 16:11:46 GMT -5
any updates on how the car is coming ? i have got the trans in ..now i'm tryin to rig my stock x-member to work ...u have any tips? it's a tight fit!!!!! put dom on and run nos fuel lines     |
|
|
|
Post by coony278 on Jul 8, 2010 18:39:18 GMT -5
I ran a stock trans cross memeber for awhile. I had to shim it way up to get my driveline angles right.
Also if it doesnt line up grind the spot welds off where the round part meets the cross member and you slide can it forward or backwards to get it lined up . I hope that made sense.
Looking good ! Looks like your getting close.
|
|
|
|
Post by jaywill on Jul 9, 2010 3:20:04 GMT -5
thanks alot ...it lines up pretty good.ijust need to put a 2" pice of steel in the center 4 it to be right and drill a hole .....the engine should be level right? with a level ? my next problem is wiring the car any info there ? the car has been gutted of wires |
|
my that was on the motor was 2" so i might have to get the high $ ones.....